| 91.20.1006.990.11.1503 Standard 5 Slewing Ring Bearings | Oil Limiting Speed (r/min):2200; d:200mm; D:310mm; SKU:16040mc3-nsk; Static Load Rating (kN):180; Clearance:C3; Grease Limiting Speed (r/min):1900; Seals or Shields:Open Type; Dynamic Load Rating (kN):161; B:34mm; Weight:10.00 KGS; Cage Type:Brass; Availability:In Stock; |
| 282.30.0900.013 Type 110/1100.2 Standard 5 Slewing Ring Bearings | Pa:32.7 kN; Adapter sleeve assembly:SNW 30x5.5/16; A1:158.75 mm; Initial grease fill:623.7 g; N1:28.575 mm; RG:3/4 NPT; Ca:82.804 mm; Cap bolt recommended tightening torque:813.5 N·m; da:134.938 mm; J max.:463.55 mm; A2:276.225 mm; Appropriate attachment bolt size G:1 in; Mass pillow block:115 kg; P120°:149 kN; P150°:136 kN; Taconite seal:TER 127; H1:160.325 mm; ba:65.088 mm; Housing:SAFS 530; |
| 282.30.1475.013 Type 110/1600.2 Standard 5 Slewing Ring Bearings | Mass plain bearing:9.7 kg; α:6 °; Da min.:161.5 mm; Da max.:168.5 mm; r2 min.:1.1 mm; Specific static load factor K0:300 N/mm²; Specific dynamic load factor K:150 N/mm²; Basic dynamic load rating C:1700 kN; dk:164.465 mm; Lubricant:Maintenance free &nd; Basic static load rating C0:3400 kN; C:85.725 mm; Sealing solution:Triple-lip seals; da min.:123 mm; ra max.:1 mm; rb max.:1.1 mm; da max.:130.5 mm; |
| 230.21.0975.013 Type 21/1050. Standard 5 Slewing Ring Bearings | Housing:FYTWR 504 Y; Recommended diameter for attachment bolts, inch G:0.375 in; s1:18.3 mm; R1:15.8 mm; T:32.6 mm; Hexagonal key size for grub screw N:3.175 mm; A5:25.3 mm; L:60.3 mm; Basic dynamic load rating C:10.8 kN; d:19.05 mm; B4:4.5 mm; H:111.9 mm; Recommended diameter for attachment bolts, mm G:10 mm; Fatigue load limit Pu:0.28 kN; Limiting speed:5000 r/min; Thread grub screw G2:1/4-28 UNF; |
| 62.30.1400.001.21.1504 Standard 5 Slewing Ring Bearings | A2:36.093 mm; B:3.969 mm; Hexagonal head bolts:2 x 5/8-11x1-1/4; Mass locking plate:0.44 kg; L:222.25 mm; A1:53.569 mm; A3:47.625 mm; |
| 61.30.1180.000.11.1504 Standard 5 Slewing Ring Bearings | SKU:qj216-n2-mpa-fag; Static Load Rating (kN):137; Dynamic Load Rating (kN):132; Cage Type:Brass; D:140mm; Weight:1.84 KGS; d:80mm; B:26mm; Limiting Speed Rating (r/min):8000; Fatigue Load Rating (kN):7.1; Availability:In Stock; Seals or Shields:Open Type; Clearance:Standard; |
| 61.25.0855.575.11.1403 Standard 5 Slewing Ring Bearings | L:510 mm; N:34 mm; Da:280 mm; Ca:108 mm; Appropriate attachment bolt, rec. tightening torque:665 N·m; P0°:1700 kN; Locating ring:2 x FRB 17/280; H2:70 mm; H1:170 mm; Cap bolt, size:M 24x140; Oil level, max.:55 mm; P120°:760 kN; Oil level, min.:47 mm; Cap bolt, rec. tightening torque:350 N·m; Oil seal:2 x TSD 3036/6.7/16; da:163.512 mm; P180°:850 kN; A:226 mm; J1:100 mm; Q150°:1040 kN; |
| 281.30.1475.013 Type 110/1600.1 Standard 5 Slewing Ring Bearings | Availability:In Stock; Clearance:Standard; Cage Type:Steel; d:55mm; SKU:61811-qbl; B:9mm; D:72mm; Seals or Shields:Open Type; Weight:0.20 KGS; |
| 62.25.1077.308.11.1504 Standard 5 Slewing Ring Bearings | Mass needle roller and cage assembly:0.0085 kg; Fw:24 mm; Limiting speed:19000 r/min; Basic dynamic load rating C:9.35 kN; Fatigue load limit Pu:1.73 kN; U:10 mm; Reference speed:17000 r/min; Basic static load rating C0:15 kN; Ew:28 mm; |
| 11.25.1200.601.21.1503 Standard 5 Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:138000 N; d:65.000 mm; D:140.0000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3200 rpm; B:61.90 mm; Oil Speed Rating n2:4300 rpm; Accessories:Two Seals & Snap-Rin; Basic Static Radial Load Rating Co:108000 N; Grease Speed Rating n1:3200 rpm; |
| 162.25.0886.891.21.1503 Standard 5 Slewing Ring Bearings | Sealed Speed Rating n3:3600 rpm; B:20.00 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:7000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:32500 N; D:110.0000 mm; d:70.000 mm; Basic Dynamic Radial Load Rating C:41000 N; |
| 62.25.0955.500.11.1503 Standard 5 Slewing Ring Bearings | Eye bolt:2 x 3/8-16 UNC; ba:86.519 mm; J min.:492.125 mm; H2:69.85 mm; R1:115.888 mm; PosiTrac Plus contact element:2 x B10724-130; RG:3/4 NPT; Da:309.999 mm; Stabilizing ring:SR-34-0; Housing:SAW 534; Appropriate attachment bolt size G:1 in; h:54.769 mm; P120°:85.9 kN; A2:242.887 mm; PG:1/4 NPT; J max.:549.275 mm; P180°:92.5 kN; Ca:119.812 mm; P60°:234 kN; Max. speed for PosiTrac Plus seal:950 r/min; |