| No. | Brand | F | D | J | H | N | A | T | L |
| EP2B-S2-215L | DODGE | - | - | - | - | - | - | - | - |
| INS-S2-307R | DODGE | - | - | - | - | - | - | - | - |
| F4B-SC-17M | DODGE | - | - | - | - | - | - | - | - |
| WS-308X9-TUFR | DODGE | - | 190.0000 mm | - | - | - | - | - | - |
| P2B-SCB-012 | DODGE | - | - | 260.00 mm | - | - | - | - | - |
| F2BZ-DL-012 | DODGE | - | - | - | - | - | - | - | - |
| NSTU-LT10-100 | DODGE | 340 mm | 460 mm | - | - | - | - | - | - |
| SEP2B-IP-108R | DODGE | - | - | - | - | - | - | - | 225.00 mm |
| CP4B532-USAF-508TT | DODGE | - | 12.4375 in | - | - | - | - | - | - |
| TB-SC-108-NL | DODGE | - | - | - | - | - | - | - | - |
| F4S-IP-107RE | DODGE | - | - | - | - | - | - | - | - |
| WSTU-SC-203 | DODGE | - | - | - | - | - | - | - | - |
| P2B-DLUEZ-030M-PCR | DODGE | - | 72.0000 mm | - | - | - | - | - | - |
| P2B518-USAF-303LERAH | DODGE | - | 265.0000 mm | - | - | - | - | - | - |
| SP4B-IP-212R | DODGE | - | - | - | 150.00 mm | - | 110.00 mm | - | 275.00 mm |
| 50EC | DODGE | - | - | - | - | - | - | - | - |
| WSTU-GTM-211 | DODGE | - | - | - | - | - | - | - | - |
| TPHU-S2-315RE | DODGE | - | - | - | - | - | - | - | - |
| WSTU-S2-200R | DODGE | - | 298.450 mm | - | - | - | - | - | - |
| F2B-SXR-40M | DODGE | - | - | - | - | - | - | - | - |
| WSTU-IP-206RE | DODGE | - | 52.0000 mm | - | - | - | - | - | - |
| P2B-BZSP-211 | DODGE | - | - | - | - | - | - | - | - |
| P4B524-USAF-403LER | DODGE | - | - | - | - | - | - | - | - |
| F4B-GTAH-09 | DODGE | - | - | - | - | - | - | - | - |
| NSTU-SC-100 | DODGE | - | - | - | - | - | - | - | - |
| P2B-GT-010 | DODGE | - | 160.000 mm | - | - | - | - | - | - |
| EP4B-IP-204RE | DODGE | - | 30.0000 mm | - | - | - | - | - | - |
| P2B-DLM-107 | DODGE | - | - | - | - | - | - | - | - |
| LFT-GT-20M | DODGE | - | - | - | - | - | - | - | - |
| DODGE NSTU-LT10-100 Mounted Units & Inserts | D:460 mm; Pu:107.030 kN; Static (Coa):1310 kN; r1s (min):5 mm; B:74 mm; s:4.5 mm; F:340 mm; b1:36 mm; d2:300 mm; Dynamic (Ca):891 kN; |
| DODGE BUSH-BZSP-307 Mounted Units & Inserts | R - Cone Backface To Clear Radius1:6.35 mm; Cage Type:Stamped Steel; Bearing Weight:29.60 Kg; Cg - Geometry Factor:0.133; r - Cup Backface To Clear Radius2:6.35 mm; D:304.8 mm; e - ISO Factor8:0.73; C0 - Static Radial Rating:282000 lbf; da - Cone Frontface Backing Diameter:171.96 mm; Db - Cup Backface Backing Diameter:260.10 mm; |
| 1.875 Inch | 47.625 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.25 Inch | 57.15 Millimeter DODGE P2B-EXL-114R Pillow Block Bearings | G2 - Heat Generation Factor (Rib-Roller End):15.9; R - Cone Backface To Clear Radius3:0.14 in; C90 - Dynamic Radial Rating (90 million revolutions)5:12500 lbf; C0 - Static Radial Rating:46800 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:83900 lbf; a - Effective Center Location4:0.08 in; db - Cone Backface Backing Diameter:3.11 in; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:21700 lbf; |
| 1.25 Inch | 31.75 Millimeter x 1.75 Inch | 44.45 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE P2B-DL-104 Pillow Block Bearings | Size (mm):1.25 Inch | 31.75 Millimeter x 1.75 Inch | 44.45 Millimeter x 1.875 Inch | 47.63 Millimeter ; |
| DODGE 84AUX908 Mounted Units & Inserts | Dimension H1:1.6 in; Weight:436 lb; Seal Type:Felt Type; Dimension J:18.1 in; Cor - Static Load Rating:262577 lbf; Shaft Size:8.875 in; Support Type:Four-Bolt Plummer Bl; Note:This product line wa; Dimension H2:21.3 in; Series Type:Light Series; |
| DODGE FC-IP-408LE Flange Block Bearings | Cone Part Number:28158; C0 - Static Radial Rating:15500 lbf; Series:28000; R - Cone Backface To Clear Radius1:1.520 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4390 lbf; Da - Cup Frontface Backing Diameter:71.88 mm; B:20.635 mm; Y - ISO Factor9:1.49; da - Cone Frontface Backing Diameter:44.96 mm; Db - Cup Backface Backing Diameter:68.07 mm; |
| 1.181 Inch | 30 Millimeter x 1.563 Inch | 39.69 Millimeter x 1.689 Inch | 42.9 Millimeter DODGE P2B-DLUEZ-030M-PCR Pillow Block Bearings | Basic Static Radial Load Rating Co:27500 N; Grease Speed Rating n1:6000 rpm; Accessories:One Shield & Snap-Ri; d:35.000 mm; D:72.0000 mm; Basic Dynamic Radial Load Rating C:37700 N; Sealed Speed Rating n3:6000 rpm; Oil Speed Rating n2:8000 rpm; B:27.00 mm; Fillet Radius ra:1.00 mm; Size (mm):1.181 Inch | 30 Millimeter x 1.563 Inch | 39.69 Millimeter x 1.689 Inch | 42.9 Millimeter ; |
| 1.688 Inch | 42.875 Millimeter x 2 Inch | 50.8 Millimeter x 2.25 Inch | 57.15 Millimeter DODGE P2B-DLHAH-111-E Pillow Block Bearings | Db - Cup Backface Backing Diameter:5.04 in; Cg - Geometry Factor:0.113; D:5.3125 in; e - ISO Factor2:0.37; Design Units:Imperial; Da - Cup Frontface Backing Diameter:5.16 in; r - Cup Backface To Clear Radius1:0.06 in; Y - ISO Factor3:1.62; Cup Part Number:LL420510; C - Cup Width:0.4688 in; Size (mm):1.688 Inch | 42.875 Millimeter x 2 Inch | 50.8 Millimeter x 2.25 Inch | 57.15 Millimeter ; |
| 3.5 Inch | 88.9 Millimeter x 4.17 Inch | 105.918 Millimeter x 3.75 Inch | 95.25 Millimeter DODGE EP2B-IP-308L Pillow Block Bearings | Lockwasher and Lockplates:MB13; L:50.00 mm; Thread G:M65x2; D3:85 mm; Weight:0.46 Kg; Appropriate Hydraulic Nut:HMV13; d1:60.00 mm; Locknut:KM13; C:14 mm; Size (mm):3.5 Inch | 88.9 Millimeter x 4.17 Inch | 105.918 Millimeter x 3.75 Inch | 95.25 Millimeter ; |
| 1.938 Inch | 49.225 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.25 Inch | 57.15 Millimeter DODGE P2B-EXL-115R Pillow Block Bearings | L1:515.00 mm; Ro:G1/4; d1:670.00 mm; b:65 mm; Appropriate Hydraulic Nut:HMV150; t:15 mm; e:15.0 mm; Weight:275.00 Kg; Thread D12:Tr750x7; Size (mm):1.938 Inch | 49.225 Millimeter x 3.5 Inch | 88.9 Millimeter x 2.25 Inch | 57.15 Millimeter ; |
| DODGE FC-DL-104 Flange Block Bearings | Support Type:Take-Up; Dimension B:5.0 in; Dimension H:1.3 in; Dimension D:8.0 in; Seal Type:Aluminium Triple Lab; Bearing UPC:013992034793; Shaft Size:45 mm; Dimension A:5.7 in; Maximum Speed:4350 rpm; Dimension X:0.9 in; |
| DODGE NSTU-SC-100 Take Up Unit Bearings | Float:0.050 in; Weight:11.0 lb; Eng Internal Radial Clearance - Min:0.0016; e - Geometry Factor:0.25; Eng Internal Radial Clearance - Max:0.0026; Housing Style:Four-Bolt Square Fla; Dimension N:2.560 in; Dimension SA:2.75 in; Grease Lubrication - T Seal:3550 rpm; Dimension M:1.75 in; |
DODGE WSTU-VSC-104 Take Up Unit Bearings Video
125555 - Dodge - WSTU-VSC-104 | MRO-PT
125555 - Dodge - WSTU-VSC-104 ; Height: 4.13 in ; Length: 4.87 in ; Load Capacity: 5759 lb Dynamic/3461 lb Static ; Series: 207 ; Suitable For Use With: WS308 Frames.
125555 wstu-vsc-104 - dodge - 3BG Supply Co.
Buy DODGE 125555 WSTU-VSC-104 Take Up Unit from 3BG Supply. Buy DODGE Take Up Unit online from 3BG Supply - We simplify & supply industrial MRO and ...
setscrew.pdf - AHR International
The result is the DODGE SC/SCM/. VSC/SL line. It is the most current de- sign setscrew mounted ball bearing on the market and provides the user un-.128 pages
dodge wstu-vsc-104 - Lily Bearing Online
Looking for DODGE WSTU-VSC-104 BEARING? Price $81.48 + Free Shipping! Easy online ordering with 24/7 expert product support.
Dodge 125555 WSTU-VSC-104 Take-Up Ball Bearing Unit
Baldor 125555 | WSTU-VSC-104 Take-Up Ball Bearing Unit - Pay in EUR/USD | Delivery across Europe, Middle East, Africa / SE Asia | +44 203 287 5224 ...
Dodge WSTU-SC-104 - ISC Companies
Dodge WSTU-SC-104 Wide Slot Take-Up, Set Screw Ball Bearing, Mfg Part Number 125360, Shaft Size 1-1/4 in. (1.25"), SC Normal Duty, 207 Series.
NSTU-VSC-104 - DODGE | Take Up Unit Bearings | BDI USA
DODGE,125539..,Take,Up,Bearing,Only;,1-1/4,Bore;,Slot,Width;,3-1/2,to,Distance;,Ball,Bearing;,Unit,Set,Screw,Mount;,NS308,Frame;,INS-VSC-104,Insert,Part; ...
Dodge® 125555 | Turtle & Hughes
WSTU-VSC-104 Dodge® 125555 207 Intermediate Duty Non-Expansion Single Lip Value Line Wide Slot Take-Up Set Screw Ball Bearing, 1-1/4 in Dia Bore, ...